Watch this video below for steps to rid your home of mold and mildew.

In the video above, bleach is used to clean and kill mold. I would not recommend using bleach to clean / kill mold as bleach would release harmful fumes which are equally bad for your health. White vinegar is a safer alternative to bleach for cleaning mold and mildew.

To clean and kill mold with white vinegar, mix 1 part of white vinegar to 1 part of water and spray the solution onto the problem spots. You may use undiluted vinegar solution to treat stubborn mold stains. Let the solution to sit for at least 15 minutes before scrubbing off with a mixture of Borax and white vinegar. Repeat this process until all the mold and mildew are gone. Rinse well with clean water or wipe clean using damp cloth if rinsing is not possible. Allow the areas to dry completely.

Related Posts:

• Removing mold mildew from wood
• Mold Removal with Tea Tree Oil
• Black Mold Removal – Part 2

Molds nourish on the minerals and oil in the paint of the wood surface. This causes discoloration to the wood surface. Sometimes, they can eat into the paint film and penetrate to the underlying wood and destroy the structure.

Most of the times, using some mold or mildew resistant paints for outdoor wood surfaces can prevent this from happening. These paints are formulated with special chemicals to fight mold attack. You can get one of this paint from your local paint and hardware stores.

Bear in mind though, these mold-resistant paints are not suitable to be used on window sills, beds, playpens or wooden toys as the chemicals in the paint can be very hazardous to small children.

How to remove mold and mildew from wood

If you see molds or mildew start growing on wood surface, increase the air circulation and use heat to dry the wood as much as possible. Always keep in mind that stagnant air is as dangerous as stagnant water, it promotes mold growth. Regulate the ventilation to allow fresh air to flow in.

To clean mold and mildew from mildly infested wood materials:

1. Moisten the infected area with little plain water; this is to prevent the molds from becoming airborne when disturbed.
2. Scrub off the visible molds and mildew with mild alkali. You can use washing soda or trisodium phosphate; mix 10 tablespoons to a gallon of water. Alternatively, a mixture of borax and white vinegar works well too.
3. Wipe clean with a damp cloth if rinsing is not possible. Discard the cloth when it is soiled with mold and mildew. You will not want the soiled cloth to infect other areas of your house.
4. After the cleaning is done; spray a layer of white vinegar onto the wood surface and leave it without rinsing. This helps to disinfect and prevent future mold growth.
5. Allow the wood to dry completely in the sun if possible. Otherwise, use a blower or fan to help drying the surface.
6. Apply mold or mildew resistant paint.

If the molds have eaten through the paint or coating, you will need to remove all the paint or coating from the problem spots before cleaning the molds. Use undiluted vinegar to moisten the stained spot and let the solution to sit for at least 15 minutes before sanding down the paint / coating. Scrub off the mold with a stronger solution this time if necessary. Rinse well and allow the wood to dry thoroughly. Lastly spray a layer of undiluted white vinegar to help disinfect the area and prevent future mold growth.

Related Posts:

• Control Mold and Mildew in Your Home
• Mold Removal with Tea Tree Oil
• Are you missing out the Mold Manuscript Course?

While tea tree oil is expensive, its broad-spectrum fungicide power seems to be able to kill almost all mold species. Tea tree oil is definitely a better alternative to bleach as it is natural and it does not produce harmful fumes that hurt the environment or the surrounding living beings.

Kill mold and mildew with tea tree oil

1. Mix 2 teaspoons of tea tree oil with 2 cups of water in a spray bottle.
2. Shake well to blend.
3. Spray the tea tree oil solution onto the problem areas such as moldy ceiling, musty rug, moldy shower curtain, bathroom tub, walls and floors.
4. Let the solution to stand, do not rinse with water.
5. It will take few days for the strong smell of tea tree oil to dissipate.

This tea tree oil spray works wonder in killing and preventing mold. It can also help to remove musty mold odor. I usually keep a bottle of this spray in the bathroom for regular cleaning. Spray tea tree oil solution regularly on the areas prone to mold and mildew, such as bathroom walls and shower curtain can help preventing mold and mildew.

Related Posts:

• Control Mold and Mildew in Your Home
• Are you missing out the Mold Manuscript Course?
• Hydrogen Peroxide for Mold Removal

Mind you that the course is for both home owners and business owners especially for those who are in home improvement industry. While the course was initially made for do it yourselfers like you and I, somehow word gets out quick and those home improvement guys are already on the waiting list to get into the mold business.

I can’t promise you as of how long the page will be up for. Grab your copy of Mold Manuscript Course before it is too late. Don’t lose your home to mold.

Some helpful steps anyone can follow to remove mold:

1. Identify the source of the problem, this usually includes excessive moisture problem or water damage
2. Fix the source of the problem to prevent it from coming back
3. Inspect the severity of the problem
4. Follow the remediation guidelines given in Mold Manuscript
5. Start removing any contaminated materials that could pose a threat to future mold amplification.
6. Use organic mold cleaning products to remove mold and make sure it never comes back.

By following the Mold Manuscript remediation guidelines, I don’t see why one cannot save his or her home from mold. You really don’t have to spend thousands of dollars to get someone to do things that you could have done it yourself. Trust me, you will regret for not getting a copy of Mold Manuscript for yourself. Act fast, the door will be closed anytime.

Related Posts:

• Control Mold and Mildew in Your Home
• Mold Removal with Tea Tree Oil
• Hydrogen Peroxide for Mold Removal

Hydrogen peroxide, H2O2 breaks down to water and oxygen, thus creating no residual toxins of any kind when used to clean or kill mold. You can hardly see any evidence of its use in the surrounding environment after a few hours of the application.

Therefore, hydrogen peroxide is a much safer alternative as compared to bleach for removing mold at home. As hydrogen peroxide is less abrasive, it is also safe to be used on porous materials like wallpaper or fabric surfaces.

I usually get my bottle of hydrogen peroxide from a regular drug store. They commonly come in 3% concentration, which is pretty good for the mold cleaning job. It is very affordable; a bottle of hydrogen peroxide only costs me less than a dollar.

Here’s how I kill mold with hydrogen peroxide:

1. Mix one part of hydrogen peroxide with 3 parts of water.
2. Fill this hydrogen peroxide solution into a spray bottle.
3. Spray the solution onto the mold contaminated areas and let stand.
4. When the solution has dried out, re-apply hydrogen peroxide solution again onto the same areas and let it sit for another 15 minutes.
5. Then, scrub the areas to remove all the mold stains.
6. You may need to repeat step 4 to 5 when dealing with stubborn mold stains.
6. Wipe clean with a sponge or cloth.

Since light will reduce the effectiveness of hydrogen peroxide, I usually keep the bottle of the remaining hydrogen peroxide in dark place and away from direct sunlight.

Related Posts:

• Control Mold and Mildew in Your Home
• Mold Removal with Tea Tree Oil
• Are you missing out the Mold Manuscript Course?

If your furniture has lots of molds, clean them outdoor. Remember to put on goggles and face mask to protect yourself from the hazardous mold spores. These tiny particles are very harmful to your lungs and they can trigger respiratory allergies like coughing or even asthma in people who are sensitive to molds.

To implement leather mold removal, first you need to prepare a mild soap solution with either hand soap or dish detergent and mix with water. Use a soft-bristled toothbrush to gently brush off the mold in circular motion. Next, use a damp cloth to wipe off the soap solution. You may apply a dab of white vinegar to help disinfect the mold stain.

Once the mold is completely removed from the leather, you need to use leather conditioner to restore the moisture. Use a clean cloth and apply some leather conditioner onto the spot. Rub gently until the conditioner is fully absorbed by the leather.

The following video demonstrates on how to remove mold from a leather jacket:

Related Posts:

• Control Mold and Mildew in Your Home
• Removing mold mildew from wood
• Removing Mold with Baking Soda and Vinegar Paste

After the removal of black mold, there are a number of items that you need to dispose of besides your clothes. Sometimes it is hard to completely remove black mold from porous materials like paper, drywall, wood and carpeting.

In these circumstances, you have no choice but to discard the materials. Isolate the mold-infected items in a properly sealed plastic bag. Discard the brushes and gloves used to clean and remove the black mold.

After the removal of black mold in the room, use a vacuum to remove all traces of airborne mold spores. Consider using an Ionizer to purify the air within the room after the course of black mold removal.

Fixing the Cause of Black Mold

It is often not enough to just remove the black mold, you need to find the cause of the problem and fix it to prevent mold from returning. The problem usually associated with excessive moisture within the house.

Find all possible leakages in the house such as leaky roofs, leaking pipeline or plumbing. Areas that are regularly flooded are also good breeding grounds for black mold. Get these fixed and consider restructuring the drainage system to minimize the flooding problem.

Elevated indoor humidity and weak air circulation do contribute to the growth of black mold as well. Control the indoor humidity within 50% – 60% with the help of a dehumidifier. Invest in a good ventilation system to provide better air circulation.

Black mold is poisonous and it can cause serious health problems to you and your family. Black mold removal is a task that cannot be delayed dealing with. Don’t worry about the huge cost of hiring professionals to do the black mold removal; you can always implement the task yourself.

Get your hands dirty with the methods illustrated above to start your black mold removal project. Make sure you take all the necessary precaution measures when doing black mold removal.

If you are tired of the ongoing black mold removal task, why not exploring professionals’ strategies to black mold removal, remove black mold once and for all. Mold Manuscript details down all the essential steps to successful black mold removal and the secrets to prevent black mold from returning. These are the exact formulas used by mold professionals who can easily charge $20,000 to $100,000 for a black mold removal project.

Related Posts:

• Black Mold Removal – Part 1
• Control Mold and Mildew in Your Home
• Removing mold mildew from wood

There are 2 options when it comes to black mold removal: you can either hire professionals to implement the black mold removal project; or you can do it yourself. If you choose to implement black mold removal yourself, here are the precaution measures you need to take.

Precautions for black mold removal

1. Use disposable clothing when performing black mold removal. Discard the clothing after you have finished with the removal of black mold. Do not wash it with your other laundries. This is to prevent the mold spores that attached to the your clothes from infecting other laundries. Black mold is deadly to your health.

2. Use face mask or respirator to protect yourself from inhaling the hazardous mold spores.

3. Protect your eyes with goggles that are able to filter tiny spores.

4. Make sure you take short breaks in between the course of black mold removal to give yourself some fresh air.

5. Seal off the area or room that you intend to carry out black mold removal with the use of plastic sheeting and duct tape.

6. Before you begin with black mold removal, make sure you moisten the area or surface that you are working on. This helps to prevent mold spores from becoming airborne.

Black Mold Removal Procedure

1. Wash off the visible surface mold as much as possible with soap and water.

2. To disinfect the area, you have 2 options. Use mild bleach solution on non-porous surface like counter top, tiles, glass, walls, floor, tub, etc. Alternatively, you can use undiluted white vinegar for black mold removal.

3. Spray the bleach solution or vinegar solution onto the area and let it sit for at least 15 minutes before rinse off with warm water.

4. Allow the area to dry completely.

Related Posts:

• Black Mold Removal – Part 2
• Control Mold and Mildew in Your Home
• Removing mold mildew from wood

In this slide show, you will get to learn about:

1. The causes of attic mold
2. How attic mold grows
3. Best method for roof ventilation to prevent attic mold
4. Attic mold treatment

Slide Show About Attic Mold

Related Posts:

• Chemical Free Soda Blast Mold Remediation
• Control Mold and Mildew in Your Home
• Removing mold mildew from wood

Bleach is the product we have known for years to be good at killing bacteria and viruses. Some believe bleach can kill mold as well. Yes, bleach is a mold killer, but that’s limited to molds grow on non-porous materials such as counter-tops, tiles, bathroom, shower glass, tubs, etc. When dealing with mold infection on non-porous surfaces, you can use a mixture of less than a cup of bleach to one gallon of water to effectively disinfect and kill molds.

However, the use of bleach to kill molds on porous materials is not recommended for the fact that bleach contains 99% of water. When bleach is used to clean and disinfect porous materials like wood and drywall, the Iodin structure of bleach prevents Chlorine from soaking into the materials to kill the roots of molds. While the water element of bleach penetrates through the surfaces and feed the roots. Therefore remediating porous materials with bleach is said to accelerate mold growth rather than stopping and killing it.

Bleach is corrosive. It releases harmful fumes that can cause serious health problems. When bleach is used as mold removal product, make sure you follow proper safety measures to protect yourself from inhaling the toxic fumes.

In conclusion, bleach can be used as mold removal product for non-porous surfaces like glass, tiles, tubs, counter-top and etc. Do not ever use bleach to kill mold on porous materials like wood and drywall. It expedites mold infestation due to the water content of bleach. Remember to put on protective gears whenever dealing with any mold removal product such as bleach. Do not mix bleach with ammonia, as this will create toxic fumes. Bleach is not registered with EPA as a mold removal product. Thus the effectiveness of killing mold with bleach is not proven.

Related Posts:

• Control Mold and Mildew in Your Home
• Removing mold mildew from wood
• Black Mold Removal – Part 1