Related Posts:

• Stop Mold Without Exposing Spores
• Control Mold and Mildew in Your Home
• Attic Mold

In this slide show, you will get to learn about:

1. The causes of attic mold
2. How attic mold grows
3. Best method for roof ventilation to prevent attic mold
4. Attic mold treatment

Slide Show About Attic Mold

Related Posts:

• Chemical Free Soda Blast Mold Remediation
• Control Mold and Mildew in Your Home
• Removing mold mildew from wood

What to Do if You Encounter a Mold Problem

If by chance, you do encounter a mold problem, the first thing that should be done is to eliminate the source of the moisture or water.  Then you should dry the area out by using a dehumidifier.  To further eliminate the mold problem, you need to scrub the surfaces that have mold with mold removal products. You can use normal household cleaners to minor mold infestation. The next step to solve the mold problem is to bleach the affected areas and to do a weekly vinegar rinse. Then it is highly advisable to paint with oil-based paint if possible.  This eliminates any future mold problem by trapping any remaining mold spores.  It is also recommended to use an air purifier to eliminate airborne spores from the area.  This is what you should do if you encounter a mold problem in your home.

Related Posts:

• Control Mold and Mildew in Your Home
• Are you missing out the Mold Manuscript Course?
• Mold Removal with Tea Tree Oil

As I mentioned earlier, mold needs 4 items to grow – water, food, ideal temperature and air.

We can’t control the air and food source, but we can reduce the moisture content in our homes to cripple mold activities.

Address all leaking pipes, roofs and windows without any delay. This is because mold needs a constant supply of moisture to take hold before multiplying. We stop mold by cutting off its water source. If a leak is repaired immediately, house mold cannot spread.

Good drainage is important to our homes. Rain water should be drained away rather than allowed to collect in the basement.

Ensure that wet areas such as sinks, toilets, laundry rooms and bathtubs do not have standing water.

To keep our homes at low humidity, we may consider the use of a dehumidifier or an air-conditioner.

Be mindful of areas where cold and warm air meets, the ideal situation for creating moisture.

Be a mold inspector of your beloved home, and check especially the exterior. Are there any chances for water to leak into the interior? Fix as soon as possible any cracks in the wall. Mold inspection and mold detection go hand in hand towards mold control.

Also, we must not forget to make sure our homes are well ventilated. Fresh air that recycles in the home interior provides a clean, healthy environment for us to live in.

Related Posts:

• Home Mold Problem: Bathroom Mold | Basement Mold | Ceiling Mold | Hidden Mold
• Chemical Free Soda Blast Mold Remediation
• Removing Mold with Baking Soda and Vinegar Paste

• Respiratory irritation
• Joint aches
• Headaches
• Cough
• Blocked or runny nose
• Eye irritation
• Skin allergies
• Fatigue

These symptoms may or may not be caused by mold presence. But where mold is found in homes, the rate of these symptoms surfacing is high. If your children have eye irritations, ask whether they have been touching places with mold growing and whether they had subsequently rubbed their eyes without washing their hands first. And if you found your family constantly having cough or runny nose, check your home for mold existence.

Of course, there are other factors linked to the above symptoms, and they may not be associated with mold at all. But if you suspect that your health is being affected by mold, do see your doctor for confirmation.

Related Posts:

• Mold – How they affect our health
• Mold Allergy
• Mold in your home

Now how does that happen?

Spores are the reason why mold can multiply. Spores, produced by mold, create mold allergy and other sicknesses connected to mold exposure. Mold itself cannot cause that.

When spores are released into the air and land on a surface that can provide water, air and food, mold reproduces and grow.

And that’s exactly what happened to our homes. An abundance of spores simply drift in through open doors and windows, pushed by the winds. By the way, we also bring indoors spores that settle on our clothes and shoes.

Mold spores constantly find their way into our homes but we can halt its growth by making sure the conditions it needs to germinate are absent.

It is cheaper to prevent mold growth than to remove mold that has already grown in our homes.

Related Posts:

• Home Mold Problem: Bathroom Mold | Basement Mold | Ceiling Mold | Hidden Mold
• Symptoms from mold growing in our homes
• Chemical Free Soda Blast Mold Remediation