These are what you need for DIY mold cleaning job:

• Protective gears (goggles, face mask, long rubber gloves, disposable clothing)

• Visqueen (or other plastic sheeting material)

• Blue Tape

• Dry wall cutter and / or Sander / Sand paper

• Garbage bags

Follow these simple 5 Steps for easy home mold removal.

Step 1: Assessing the area and problem

1. Investigate how far does the problem stem from.
2. Identify all the sources that lead to mold growth.
3. Plan out the mold cleaning procedure and protocols

Step 2: Contain the problem area

1. Put on protective gear before handling mold. Wear goggles, face mask, long rubber gloves and disposable clothing. This can help to protect yourself from ingesting the hazardous mold.
2. Use Visqueen, or any other plastic sheeting materials to contain the problem area.
3. This is to prevent mold spores from getting into other areas of your house.
4. Contain your area with the help of blue tape, like the picture below:

Step 3: Start the mold cleaning procedure

1. Dampen the mold infected areas with white vinegar water. Use 1 part of white vinegar to 1 part of water. This helps to prevent molds from becoming airborne when disturbed / cleaned.
2. For cleaning ceiling mold, use a mop to dampen the problem spots.
3. Use sander or sand paper to sand off the stubborn molds off wooden items like cupboards, wooden tables, etc.
4. Scrub the area while it is still damp using baking soda and white vinegar mixture. Repeat this to remove all the visible molds.
5. Rinse well with plain water. If rinsing is not possible, wipe clean the area with a dampen cloth. Discard and replace the cloth once it is soiled with molds. You won’t like the idea of contaminating other areas of your house with the soiled cloth.
6. Let the area to dry completely. Do not use fan or blower to help drying the area as this could spread the airborne mold spores.
7. Lastly spray a layer of undiluted white vinegar over the cleaned surface and allow to dry completely. This helps to kill any mold residue and to prevent future mold growth.

Step 4: Dispose Materials

1. Dispose the mold contaminated materials using the garbage bags and seal it properly with blue tape.
2. Discard the Visqueen / plastic sheetings and all other cleaning tools such as brush, mop, cloth, etc.

Step 5: Clean and Filter

1. After the mold removal is done, it’s time to clean and filter the surrounding air.
2. You may use those anti microbial soap like Pinkrobial to clean the area again.
3. Run an air purifier that comes with “Heppa” filter to purify the surrounding air.

Related Posts:

• Control Mold and Mildew in Your Home
• Home Mold Problem: Bathroom Mold | Basement Mold | Ceiling Mold | Hidden Mold
• How does mold grow?

Watch this video below for steps to rid your home of mold and mildew.

In the video above, bleach is used to clean and kill mold. I would not recommend using bleach to clean / kill mold as bleach would release harmful fumes which are equally bad for your health. White vinegar is a safer alternative to bleach for cleaning mold and mildew.

To clean and kill mold with white vinegar, mix 1 part of white vinegar to 1 part of water and spray the solution onto the problem spots. You may use undiluted vinegar solution to treat stubborn mold stains. Let the solution to sit for at least 15 minutes before scrubbing off with a mixture of Borax and white vinegar. Repeat this process until all the mold and mildew are gone. Rinse well with clean water or wipe clean using damp cloth if rinsing is not possible. Allow the areas to dry completely.

Related Posts:

• Removing mold mildew from wood
• Mold Removal with Tea Tree Oil
• Black Mold Removal – Part 2

Molds nourish on the minerals and oil in the paint of the wood surface. This causes discoloration to the wood surface. Sometimes, they can eat into the paint film and penetrate to the underlying wood and destroy the structure.

Most of the times, using some mold or mildew resistant paints for outdoor wood surfaces can prevent this from happening. These paints are formulated with special chemicals to fight mold attack. You can get one of this paint from your local paint and hardware stores.

Bear in mind though, these mold-resistant paints are not suitable to be used on window sills, beds, playpens or wooden toys as the chemicals in the paint can be very hazardous to small children.

How to remove mold and mildew from wood

If you see molds or mildew start growing on wood surface, increase the air circulation and use heat to dry the wood as much as possible. Always keep in mind that stagnant air is as dangerous as stagnant water, it promotes mold growth. Regulate the ventilation to allow fresh air to flow in.

To clean mold and mildew from mildly infested wood materials:

1. Moisten the infected area with little plain water; this is to prevent the molds from becoming airborne when disturbed.
2. Scrub off the visible molds and mildew with mild alkali. You can use washing soda or trisodium phosphate; mix 10 tablespoons to a gallon of water. Alternatively, a mixture of borax and white vinegar works well too.
3. Wipe clean with a damp cloth if rinsing is not possible. Discard the cloth when it is soiled with mold and mildew. You will not want the soiled cloth to infect other areas of your house.
4. After the cleaning is done; spray a layer of white vinegar onto the wood surface and leave it without rinsing. This helps to disinfect and prevent future mold growth.
5. Allow the wood to dry completely in the sun if possible. Otherwise, use a blower or fan to help drying the surface.
6. Apply mold or mildew resistant paint.

If the molds have eaten through the paint or coating, you will need to remove all the paint or coating from the problem spots before cleaning the molds. Use undiluted vinegar to moisten the stained spot and let the solution to sit for at least 15 minutes before sanding down the paint / coating. Scrub off the mold with a stronger solution this time if necessary. Rinse well and allow the wood to dry thoroughly. Lastly spray a layer of undiluted white vinegar to help disinfect the area and prevent future mold growth.

Related Posts:

• Control Mold and Mildew in Your Home
• Mold Removal with Tea Tree Oil
• Are you missing out the Mold Manuscript Course?

While tea tree oil is expensive, its broad-spectrum fungicide power seems to be able to kill almost all mold species. Tea tree oil is definitely a better alternative to bleach as it is natural and it does not produce harmful fumes that hurt the environment or the surrounding living beings.

Kill mold and mildew with tea tree oil

1. Mix 2 teaspoons of tea tree oil with 2 cups of water in a spray bottle.
2. Shake well to blend.
3. Spray the tea tree oil solution onto the problem areas such as moldy ceiling, musty rug, moldy shower curtain, bathroom tub, walls and floors.
4. Let the solution to stand, do not rinse with water.
5. It will take few days for the strong smell of tea tree oil to dissipate.

This tea tree oil spray works wonder in killing and preventing mold. It can also help to remove musty mold odor. I usually keep a bottle of this spray in the bathroom for regular cleaning. Spray tea tree oil solution regularly on the areas prone to mold and mildew, such as bathroom walls and shower curtain can help preventing mold and mildew.

Related Posts:

• Control Mold and Mildew in Your Home
• Are you missing out the Mold Manuscript Course?
• Hydrogen Peroxide for Mold Removal

Mind you that the course is for both home owners and business owners especially for those who are in home improvement industry. While the course was initially made for do it yourselfers like you and I, somehow word gets out quick and those home improvement guys are already on the waiting list to get into the mold business.

I can’t promise you as of how long the page will be up for. Grab your copy of Mold Manuscript Course before it is too late. Don’t lose your home to mold.

Some helpful steps anyone can follow to remove mold:

1. Identify the source of the problem, this usually includes excessive moisture problem or water damage
2. Fix the source of the problem to prevent it from coming back
3. Inspect the severity of the problem
4. Follow the remediation guidelines given in Mold Manuscript
5. Start removing any contaminated materials that could pose a threat to future mold amplification.
6. Use organic mold cleaning products to remove mold and make sure it never comes back.

By following the Mold Manuscript remediation guidelines, I don’t see why one cannot save his or her home from mold. You really don’t have to spend thousands of dollars to get someone to do things that you could have done it yourself. Trust me, you will regret for not getting a copy of Mold Manuscript for yourself. Act fast, the door will be closed anytime.

Related Posts:

• Control Mold and Mildew in Your Home
• Mold Removal with Tea Tree Oil
• Hydrogen Peroxide for Mold Removal

Hydrogen peroxide, H2O2 breaks down to water and oxygen, thus creating no residual toxins of any kind when used to clean or kill mold. You can hardly see any evidence of its use in the surrounding environment after a few hours of the application.

Therefore, hydrogen peroxide is a much safer alternative as compared to bleach for removing mold at home. As hydrogen peroxide is less abrasive, it is also safe to be used on porous materials like wallpaper or fabric surfaces.

I usually get my bottle of hydrogen peroxide from a regular drug store. They commonly come in 3% concentration, which is pretty good for the mold cleaning job. It is very affordable; a bottle of hydrogen peroxide only costs me less than a dollar.

Here’s how I kill mold with hydrogen peroxide:

1. Mix one part of hydrogen peroxide with 3 parts of water.
2. Fill this hydrogen peroxide solution into a spray bottle.
3. Spray the solution onto the mold contaminated areas and let stand.
4. When the solution has dried out, re-apply hydrogen peroxide solution again onto the same areas and let it sit for another 15 minutes.
5. Then, scrub the areas to remove all the mold stains.
6. You may need to repeat step 4 to 5 when dealing with stubborn mold stains.
6. Wipe clean with a sponge or cloth.

Since light will reduce the effectiveness of hydrogen peroxide, I usually keep the bottle of the remaining hydrogen peroxide in dark place and away from direct sunlight.

Related Posts:

• Control Mold and Mildew in Your Home
• Mold Removal with Tea Tree Oil
• Are you missing out the Mold Manuscript Course?

Mold loves warm and humid places. The higher the humidity, the more it spreads. Therefore, the first step of mold odors removal is to control the indoor humidity. Keep the humidity level within the house at 50% or below. Invest in a good dehumidifier to help regulate the indoor humidity.

Though low humidity cannot really kill the mold, but it does help to stop mold from spreading and “breathing” which emits the mycotoxins that stinks. However, if humidity level rises above 50% for more than 72 hours, mold will start to “breathe” again and release the musty odors. Thus, it is very important to keep the humidity level under control for effective mold odors removal.

It is also vital to take note that dead mold can cause musty odors as well as allergic reaction too. After you have “hibernated” the mold spores from spreading, you need to kill and remove it in order to make your home mold free. To clean visible surface mold that grows on walls, tiles, glass, tubs, and other non-porous materials, you can use normal household detergent like Borax.

Damp the surface slightly before washing to prevent molds from becoming airborne. Scrub hard with a sturdy brush to brush off all visible molds. Repeat the process if necessary especially when dealing with stubborn mold stains. Rinse with clean water and allow the areas to dry completely.

Vinegar is another good solution for mold odors removal. Vinegar can kill 80% of the mold spores. Use undiluted white vinegar to remove mold odors. Spray vinegar solution onto the surface and let it stand for at least 15 minutes to allow the vinegar to seep through the surface and kill the mold spores. If you can tolerate the strong fumes from vinegar, you may wipe dry the areas without rinsing. Otherwise rinse well with clean water and allow drying thoroughly.

Next you need to eliminate loose mold spores that are floating in the air. Use an air purifier that equipped with carbon gas filter to absorb the mycotoxins from the mold. The use of steam cleaner will also help to diminish tiny mold particles that have become airborne.

Once you are done with mold removal and getting rid of the mold odors, you need to observe a regular mold inspection to prevent molds from re-grow. Do a routine mold testing, as you will with other household maintenance tasks. Early mold detection can help minimize the infestation.

Keep the areas clean and dry as much as possible to cut down the food source for mold. Be attentive to any leakages or moisture problem in your house and get them fixed as soon as possible. Dry the damp areas or water-damage materials within 24 to 48 hours can significantly lower the risk of mold growth.

If you find yourself cannot endure the mold odors and the allergic reactions that caused by molds, and you are getting tired of dealing with repeated mold problems. Mold Manuscript provides you with professional strategies to deal with mold remediation and mold prevention. Learn how mold experts handle mold problem and prevent it from growing in the future. Easy blueprint to follow for effective mold odor removal and mold prevention.

Related Posts:

• Mold Removal with Tea Tree Oil
• Control Mold and Mildew in Your Home
• Stop Mold Without Exposing Spores

After the removal of black mold, there are a number of items that you need to dispose of besides your clothes. Sometimes it is hard to completely remove black mold from porous materials like paper, drywall, wood and carpeting.

In these circumstances, you have no choice but to discard the materials. Isolate the mold-infected items in a properly sealed plastic bag. Discard the brushes and gloves used to clean and remove the black mold.

After the removal of black mold in the room, use a vacuum to remove all traces of airborne mold spores. Consider using an Ionizer to purify the air within the room after the course of black mold removal.

Fixing the Cause of Black Mold

It is often not enough to just remove the black mold, you need to find the cause of the problem and fix it to prevent mold from returning. The problem usually associated with excessive moisture within the house.

Find all possible leakages in the house such as leaky roofs, leaking pipeline or plumbing. Areas that are regularly flooded are also good breeding grounds for black mold. Get these fixed and consider restructuring the drainage system to minimize the flooding problem.

Elevated indoor humidity and weak air circulation do contribute to the growth of black mold as well. Control the indoor humidity within 50% – 60% with the help of a dehumidifier. Invest in a good ventilation system to provide better air circulation.

Black mold is poisonous and it can cause serious health problems to you and your family. Black mold removal is a task that cannot be delayed dealing with. Don’t worry about the huge cost of hiring professionals to do the black mold removal; you can always implement the task yourself.

Get your hands dirty with the methods illustrated above to start your black mold removal project. Make sure you take all the necessary precaution measures when doing black mold removal.

If you are tired of the ongoing black mold removal task, why not exploring professionals’ strategies to black mold removal, remove black mold once and for all. Mold Manuscript details down all the essential steps to successful black mold removal and the secrets to prevent black mold from returning. These are the exact formulas used by mold professionals who can easily charge $20,000 to $100,000 for a black mold removal project.

Related Posts:

• Black Mold Removal – Part 1
• Control Mold and Mildew in Your Home
• Removing mold mildew from wood

What to Do if You Encounter a Mold Problem

If by chance, you do encounter a mold problem, the first thing that should be done is to eliminate the source of the moisture or water.  Then you should dry the area out by using a dehumidifier.  To further eliminate the mold problem, you need to scrub the surfaces that have mold with mold removal products. You can use normal household cleaners to minor mold infestation. The next step to solve the mold problem is to bleach the affected areas and to do a weekly vinegar rinse. Then it is highly advisable to paint with oil-based paint if possible.  This eliminates any future mold problem by trapping any remaining mold spores.  It is also recommended to use an air purifier to eliminate airborne spores from the area.  This is what you should do if you encounter a mold problem in your home.

Related Posts:

• Control Mold and Mildew in Your Home
• Are you missing out the Mold Manuscript Course?
• Mold Removal with Tea Tree Oil

The Importance of Mold Contractors

Mold contractors are individuals who work for a living by removing mold and mold damage for homes, offices, schools, and other buildings and belongings. Almost every place that a person lives has a local mold contractor. Mold contractors can be relied upon to identify leaks and water damaged areas that might be the breeding grounds for the nasty molds, which cause all sorts of problems.

Many mold contractors will also include cleaning in their services. They will cordon off the areas where the problems occur and treat them with high ozone shock treatments. Then the areas are swept and vacuumed to remove any traces of the mold. If you ask me, everyone should have a mold contractor on his or her list of important numbers.

Related Posts:

• Stop Mold Without Exposing Spores
• Control Mold and Mildew in Your Home
• Removing mold mildew from wood