These are what you need for DIY mold cleaning job:

• Protective gears (goggles, face mask, long rubber gloves, disposable clothing)

• Visqueen (or other plastic sheeting material)

• Blue Tape

• Dry wall cutter and / or Sander / Sand paper

• Garbage bags

Follow these simple 5 Steps for easy home mold removal.

Step 1: Assessing the area and problem

1. Investigate how far does the problem stem from.
2. Identify all the sources that lead to mold growth.
3. Plan out the mold cleaning procedure and protocols

Step 2: Contain the problem area

1. Put on protective gear before handling mold. Wear goggles, face mask, long rubber gloves and disposable clothing. This can help to protect yourself from ingesting the hazardous mold.
2. Use Visqueen, or any other plastic sheeting materials to contain the problem area.
3. This is to prevent mold spores from getting into other areas of your house.
4. Contain your area with the help of blue tape, like the picture below:

Step 3: Start the mold cleaning procedure

1. Dampen the mold infected areas with white vinegar water. Use 1 part of white vinegar to 1 part of water. This helps to prevent molds from becoming airborne when disturbed / cleaned.
2. For cleaning ceiling mold, use a mop to dampen the problem spots.
3. Use sander or sand paper to sand off the stubborn molds off wooden items like cupboards, wooden tables, etc.
4. Scrub the area while it is still damp using baking soda and white vinegar mixture. Repeat this to remove all the visible molds.
5. Rinse well with plain water. If rinsing is not possible, wipe clean the area with a dampen cloth. Discard and replace the cloth once it is soiled with molds. You won’t like the idea of contaminating other areas of your house with the soiled cloth.
6. Let the area to dry completely. Do not use fan or blower to help drying the area as this could spread the airborne mold spores.
7. Lastly spray a layer of undiluted white vinegar over the cleaned surface and allow to dry completely. This helps to kill any mold residue and to prevent future mold growth.

Step 4: Dispose Materials

1. Dispose the mold contaminated materials using the garbage bags and seal it properly with blue tape.
2. Discard the Visqueen / plastic sheetings and all other cleaning tools such as brush, mop, cloth, etc.

Step 5: Clean and Filter

1. After the mold removal is done, it’s time to clean and filter the surrounding air.
2. You may use those anti microbial soap like Pinkrobial to clean the area again.
3. Run an air purifier that comes with “Heppa” filter to purify the surrounding air.

Related Posts:

• Control Mold and Mildew in Your Home
• Home Mold Problem: Bathroom Mold | Basement Mold | Ceiling Mold | Hidden Mold
• How does mold grow?

Watch this video below for steps to rid your home of mold and mildew.

In the video above, bleach is used to clean and kill mold. I would not recommend using bleach to clean / kill mold as bleach would release harmful fumes which are equally bad for your health. White vinegar is a safer alternative to bleach for cleaning mold and mildew.

To clean and kill mold with white vinegar, mix 1 part of white vinegar to 1 part of water and spray the solution onto the problem spots. You may use undiluted vinegar solution to treat stubborn mold stains. Let the solution to sit for at least 15 minutes before scrubbing off with a mixture of Borax and white vinegar. Repeat this process until all the mold and mildew are gone. Rinse well with clean water or wipe clean using damp cloth if rinsing is not possible. Allow the areas to dry completely.

Related Posts:

• Removing mold mildew from wood
• Mold Removal with Tea Tree Oil
• Black Mold Removal – Part 2

Molds nourish on the minerals and oil in the paint of the wood surface. This causes discoloration to the wood surface. Sometimes, they can eat into the paint film and penetrate to the underlying wood and destroy the structure.

Most of the times, using some mold or mildew resistant paints for outdoor wood surfaces can prevent this from happening. These paints are formulated with special chemicals to fight mold attack. You can get one of this paint from your local paint and hardware stores.

Bear in mind though, these mold-resistant paints are not suitable to be used on window sills, beds, playpens or wooden toys as the chemicals in the paint can be very hazardous to small children.

How to remove mold and mildew from wood

If you see molds or mildew start growing on wood surface, increase the air circulation and use heat to dry the wood as much as possible. Always keep in mind that stagnant air is as dangerous as stagnant water, it promotes mold growth. Regulate the ventilation to allow fresh air to flow in.

To clean mold and mildew from mildly infested wood materials:

1. Moisten the infected area with little plain water; this is to prevent the molds from becoming airborne when disturbed.
2. Scrub off the visible molds and mildew with mild alkali. You can use washing soda or trisodium phosphate; mix 10 tablespoons to a gallon of water. Alternatively, a mixture of borax and white vinegar works well too.
3. Wipe clean with a damp cloth if rinsing is not possible. Discard the cloth when it is soiled with mold and mildew. You will not want the soiled cloth to infect other areas of your house.
4. After the cleaning is done; spray a layer of white vinegar onto the wood surface and leave it without rinsing. This helps to disinfect and prevent future mold growth.
5. Allow the wood to dry completely in the sun if possible. Otherwise, use a blower or fan to help drying the surface.
6. Apply mold or mildew resistant paint.

If the molds have eaten through the paint or coating, you will need to remove all the paint or coating from the problem spots before cleaning the molds. Use undiluted vinegar to moisten the stained spot and let the solution to sit for at least 15 minutes before sanding down the paint / coating. Scrub off the mold with a stronger solution this time if necessary. Rinse well and allow the wood to dry thoroughly. Lastly spray a layer of undiluted white vinegar to help disinfect the area and prevent future mold growth.

Related Posts:

• Control Mold and Mildew in Your Home
• Mold Removal with Tea Tree Oil
• Are you missing out the Mold Manuscript Course?

What to Do if You Encounter a Mold Problem

If by chance, you do encounter a mold problem, the first thing that should be done is to eliminate the source of the moisture or water.  Then you should dry the area out by using a dehumidifier.  To further eliminate the mold problem, you need to scrub the surfaces that have mold with mold removal products. You can use normal household cleaners to minor mold infestation. The next step to solve the mold problem is to bleach the affected areas and to do a weekly vinegar rinse. Then it is highly advisable to paint with oil-based paint if possible.  This eliminates any future mold problem by trapping any remaining mold spores.  It is also recommended to use an air purifier to eliminate airborne spores from the area.  This is what you should do if you encounter a mold problem in your home.

Related Posts:

• Control Mold and Mildew in Your Home
• Are you missing out the Mold Manuscript Course?
• Mold Removal with Tea Tree Oil

Bleach is the product we have known for years to be good at killing bacteria and viruses. Some believe bleach can kill mold as well. Yes, bleach is a mold killer, but that’s limited to molds grow on non-porous materials such as counter-tops, tiles, bathroom, shower glass, tubs, etc. When dealing with mold infection on non-porous surfaces, you can use a mixture of less than a cup of bleach to one gallon of water to effectively disinfect and kill molds.

However, the use of bleach to kill molds on porous materials is not recommended for the fact that bleach contains 99% of water. When bleach is used to clean and disinfect porous materials like wood and drywall, the Iodin structure of bleach prevents Chlorine from soaking into the materials to kill the roots of molds. While the water element of bleach penetrates through the surfaces and feed the roots. Therefore remediating porous materials with bleach is said to accelerate mold growth rather than stopping and killing it.

Bleach is corrosive. It releases harmful fumes that can cause serious health problems. When bleach is used as mold removal product, make sure you follow proper safety measures to protect yourself from inhaling the toxic fumes.

In conclusion, bleach can be used as mold removal product for non-porous surfaces like glass, tiles, tubs, counter-top and etc. Do not ever use bleach to kill mold on porous materials like wood and drywall. It expedites mold infestation due to the water content of bleach. Remember to put on protective gears whenever dealing with any mold removal product such as bleach. Do not mix bleach with ammonia, as this will create toxic fumes. Bleach is not registered with EPA as a mold removal product. Thus the effectiveness of killing mold with bleach is not proven.

Related Posts:

• Control Mold and Mildew in Your Home
• Removing mold mildew from wood
• Black Mold Removal – Part 1

Professional mold remediation is necessary when the affected area is larger than ten square feet. In most cases where the mold infestation is not severe, mold remediation can often be done by the homeowner.

What does mold remediation entail?

Step one involves removing the source of water. This ensures that mold growth does not occur again. The next thing to do would be to run a dehumidifier to eliminate moisture in the air. Then wash the surface with an antimicrobial cleaner. Then rinse down with vinegar and allow the wall or surface to dry completely. Afterward paint the affected surfaces with oil based paint. This encapsulates any leftover spores and mold residue to prevent it from coming back.

Sometimes mold remediation involves tearing out the affected areas completely. Then high ozone shock treatments are used to kill off any remaining airborne spores. This usually is done with a series of treatments. These treatments are extremely dangerous. This is why the house or structure is evacuated and cleared out before implementing the high ozone shock treatment for mold remediation.

Related Posts:

• Are you missing out the Mold Manuscript Course?
• Home Mold Problem: Bathroom Mold | Basement Mold | Ceiling Mold | Hidden Mold
• Mold Exposure and Mold Illness: The Symptoms

The Importance of Mold Contractors

Mold contractors are individuals who work for a living by removing mold and mold damage for homes, offices, schools, and other buildings and belongings. Almost every place that a person lives has a local mold contractor. Mold contractors can be relied upon to identify leaks and water damaged areas that might be the breeding grounds for the nasty molds, which cause all sorts of problems.

Many mold contractors will also include cleaning in their services. They will cordon off the areas where the problems occur and treat them with high ozone shock treatments. Then the areas are swept and vacuumed to remove any traces of the mold. If you ask me, everyone should have a mold contractor on his or her list of important numbers.

Related Posts:

• Stop Mold Without Exposing Spores
• Control Mold and Mildew in Your Home
• Removing mold mildew from wood

When it comes to home mold removal cost, most people want to run the other direction. At least after the initial reaction, they do. Upon finding out that they have a mold problem; many people want to just paint over it. This is not a smart idea. If anything, the mold growth gets worse and the problem is not solved.

High Costs of Home Mold Removal

While there are several ways to get rid of home mold, some of these options are rather expensive. Home mold removal cost is higher when you choose to remove the affected portion of the walls, ceilings, or floors. Some people choose to “gut” the affected areas, and just remove anything that has mold growth. This costs a pretty penny. Not only do you have to hire someone to make sure every bit is removed, but you also have to pay for the supplies to replace the portions of the house that were torn out. This can add up very quickly.

Cheaper Routes of Home Mold Removal

There is also a cheaper way to go with mold removal. Spending less with home mold removal cost makes everyone happy. There are organic products for low home mold removal cost. Many of these are antimicrobial and help to prevent the mold growth from reoccurring. However, one of the most important things is that you need to make sure of ventilation in your house and do proper research of your home mold removal products. Home mold removal cost can be very intimidating if you do not know what you are in for.

Related Posts:

• Are you missing out the Mold Manuscript Course?
• Home Mold Problem: Bathroom Mold | Basement Mold | Ceiling Mold | Hidden Mold
• Stop Mold Without Exposing Spores

Caution is always a good thing – Fight the Black Mold

First off, you need to identify the source of the problem. If you have suffered water damage from a flood or leaking pipes, you need to fix it. The next step would be to run a dehumidifier in the area to pull the moisture from the air. This helps to eliminate the possibility of further spreading of mold growth. Then seal off the first room in which you plan to be cleaning black mold. Hang plastic sheeting over vents, doorways, and windows. This will prevent the mold spores from traveling to other parts of your home or building.

The second step to cleaning black mold is to brush visible mold and dispose of it. Then wash the surfaces with an antimicrobial cleanser. After this, you need to dry the surface completely. It is highly recommended that if you want to properly clean black mold and prevent further mold growth, that you perform a vinegar rinse at least once a week. This is the proper method for cleaning black mold.

Related Posts:

• Control Mold and Mildew in Your Home
• Black Mold Removal – Part 2
• Black Mold Removal – Part 1

When you discover you have black mold you will want to try to find the best way to do a black mold removal process. The first step in any black mold removal process is to eliminate any sources of water that has caused the development of toxic black mold. Once you have done this you will want to start to clean the black mold affected areas. There are many products available in the market that offer solution for black mold removal and some are more environmentally healthy.

Make sure you take precautions when removing black mold

When you go about doing any form of black mold removal, you will want to make sure that you isolate the area so that while you are cleaning you do not run the risk of spreading any airborne spores. This will be a great benefit to insure that your black mold removal procedures are the most effective. In some cases you might not be able to clean the affected area due to severe growth of black mold, you will be forced to remove whatever it is for proper disposal. Once you have completed your black mold removal, you will want to consider using an air purifier to eliminate any possible mold spores that are still floating in the air. This will help in preventing the reoccurrence of black mold in the area.

Related Posts:

• Stop Mold Without Exposing Spores
• Control Mold and Mildew in Your Home
• Black Mold Removal – Part 2